Agilent Technologies N2620A - Manual (Page 42)

24 N2620A User’s Guide
2 Network Testing with the FrameScope Pro
Running an Autotest
This section describes how to run an Autotest on the network
using the FrameScope Pro. The FrameScope Pro can store
Autotest suites that define which network elements to test.
1 Press Autotest on the Main Menu screen (refer to page 22 ) to
display the Network Autotest Setup screen.
2 Press Suite to save this Autotest suite, or load a
previously-stored suite.
3 Select a stored suite from the list or select Create New, then
press Next. You can select to reload the default
suite.
4 If you select Create New, you will be prompted to type in a
new name.