Agilent Technologies N2620A - Manual (Page 130)

112 N2620A User’s Guide
3 Voice Testing with the FrameScope Pro
Running the Test
Press Goto Start when all the settings have completed to start a
Megaco/H.248 test.
The call is placed to the number set in Target Phone no with the
user-defined audio codec as specified on the Settings screen.
The test can be manually stopped by pressing Stop Test. After the
Megaco/H.248 signaling has completed, data flows across the
network and the measurement statistics appear in the IP Phone
MG Test screen.
To view more details of the QoS, press Details.
To save the test results, press Save Results.
To restart the test, press Start Test.