Agilent Technologies N2620A User Manual

Page 73

Network Testing with the FrameScope Pro

N2620A User’s Guide

If Loopback is selected, you have three options:

Option 1:

Select IP Layer loopback device. You will need to

specify the IP address or name of the device.

Option 2:

Select MAC Layer loopback device. You will need to

specify the MAC address of the device.

Option 3:

Select PHY Layer loopback device.

If FrameScope is selected, there are two options:

Option 1:

Select Auto Search to search for the FrameScope Pro

if the IP address or the name of the slave FrameScope Pro is
unknown.

Option 2:

Select Manual if the IP address or the name of the

slave FrameScope Pro is known and type in the
corresponding IP address or name.

Press Next.

Select FrameScope or
Loopback

for the target of

the test.

IP Address (or name) of the

FrameScope Pro or MAC

address of the Loopback,

depending on the selection.

Password Entry

Timeout