Agilent Technologies N2620A - Manual (Page 21)

Introducing the FrameScope Pro 1
N2620A User’s Guide 3
Laser Class 1 Label
CLASS 1 LASER PRODUCT
(IEC 60825-1 / 2001)
WA R N I N G
Take note of the following laser safety warnings.
• Under no circumstances should you look into the end of an optical
cable attached to the optical output when the device is operating.
The laser radiation can seriously damage your eyesight.
• Do not enable the laser when there is no fiber attached to the optical
output connector.
• The use of optical instruments with this product will increase eye
hazard.
• The laser module has a built-in safety circuitry which will disable the
optical output in the case of a faulty condition.
• Servicing should only be performed by qualified personnels.