Agilent Technologies N2620A - Manual (Page 115)

Voice Testing with the FrameScope Pro 3
N2620A User’s Guide 97
6 If selected, the FrameScope Pro will register with the registrars or SIP
Server. Otherwise, the FrameScope Pro will call the IP address specified
in the SIP Server at the SIP Setting screen directly.
7 If selected, the FrameScope Pro will allow the end point to send or
answer reinvites and configure the associated Session Interval, Min-SE
Interval
, and Refresher
8 The maximum allowed time between session refresh requests in a dialog
before the session times out
9 The minimum timer, which is the minimum value that can be set for the
session interval
10 The entity (for example, UAC and UAS) which initiates reinvites
11 User-defined nickname for the mode or option
12 Drop-down list that allows the selection of different custom options
13 Domain name for SIP server (which requires a name instead of an IP
address) when DNS is not present in the network
14 If selected, the FrameScope Pro will ignore the round-trip delay when
calculating MOS. This may make it easier to reconcile the MOS
measurements from different devices. (If the VoIP Option N2620A-030 is
selected.)