GW Instek PPH-1503 - Manual (Page 76)

PPH-1503 User Manual
76
Note
Click “Undo Edits” to cancel all the edited settings.
Click “Factory Defaults” to restore to the factory
default settings.
Exiting from
Remote Control
Mode
 Send a remote command to exit from
remote control mode from the PC or
long-press the unlock key on the
front panel to exit from the remote
control mode. The RMT icon in the
status bar will become greyed-out
when you exit from remote control
mode.
 The LOCK icon will be greyed-out
when the panel lock is disabled.
 Unplug the connection from the rear
panel.
RMT
LOCK
Note: Hot-swappable LAN devices can be
directly disconnected to exit.
Command Syntax
The commands that are used with the PPH-1503 meet IEEE488.2 and
SCPI standards.
SCPI Commands Overview SCPI
Command Format
SCPI is an ASCII based command language designed for test and
measurement instruments. SCPI commands uses a hierarchical structure
(tree system), and is divided into different subsystems. Each subsystem