GW Instek PPH-1503 - Manual (Page 73)

REMOTE CONTROL
73
J. Press Enter to confirm each of the
configurations.

K. Press the Menu key to exit and return
to the main menu.
Parameter Settings:
IP Address: IP address range: 1.0.0.0 to
223.255.255.255 (excluding 127.nnn.nnn.nnn).
Subnet Mask: Subnet Mask Range: 1.0.0.0 to
255.255.255.255.
Gateway: Gateway range: 1.0.0.0 to 223.255.255.255
(excluding 127.nnn.nnn.nnn).
DNS Servers: DNS Server range: 1.0.0.0 to
223.255.255.255 (excluding 127.nnn.nnn.nnn).
DHCP Follow steps A~F in the previous section,
Manun IP, above.
G. Press Enter to select DHCP. The unit
will be assigned an IP address, subnet
mask, the default gateway and other
network parameters from the DHCP
server. The corresponding parameters will
be shown in the parameter area. Use the
arrow keys to view the settings (When an
IP address is being assigned, a circular
scanning icon will appear).

H. Press the Menu key to exit and return
to the main menu.