GW Instek PPH-1503 - Manual (Page 119)

REMOTE CONTROL
119
Command *WAI
Function Waits for all pending operations to be completed
before allowing other operations to be executed.
Example *WAI
Command *TRG
Function Sends a bus trigger.
Example *TRG
Sends a bus trigger.
Command *SAV
Function Save the current setup to the selected save
location.
Description 0: Save to memory location SAV0
1: Save to memory location SAV1
2: Save to memory location SAV2
3: Save to memory location SAV3
4: Save to memory location SAV4
Example *SAV 3
Save the current setup to SAV3.
Command *RCL
Function Recall the selected save setting from memory.