GW Instek PPH-1503 - Manual (Page 33)

BASIC OPERATION
33
LimMode Current limiting mode
There are 4 settings for the current
limiting mode:
Limit, Trip, LimitRelay, Trip Relay.
The Limit settings will limit the
current. When the current reaches
the setting value, the current
remains constant, as in CC mode.
The Trip setting will turn the output
off when the current limit has been
reached.
See page
56 for details on the Limit
Relay and Trip Relay settings.
PowoOnSetup Power on settings have 11 settings:
Rst/SAV0 ~ SAV9
See page 60 for further details.
RelayControl The relay control settings have 2
configurations:
Zero/One
See page 56 for further details.
O.V.P The overvoltage settings have a
setting range of 0.05 to 15.20V or
OFF.
RecallSetup There are 6 sets of save/recall
memories.
Rst/ SAV0 to SAV4