GW Instek PPH-1503 - Manual (Page 53)

BASIC OPERATION
53
TrigLeve[4] Use the arrow keys to select
TrigLeve[4]
and
then press Enter. Key in te trigger level
setting and press Enter again to confirm
and to return back to the long integration
measurement menu. The trigger level
range is 0~5A. The default is amps (A.)
RecallSetup Use the arrow keys to select
RecallSetup
and
press Enter to go to the Recall Setup menu.
Use the arrow keys to select a saved setup
and press Enter again to confirm. See page
60 for details.
Operation Output Press the Output key. When the
Output key is lit, pulse current
measurement is active.
When no pulse current is
detected, NO PULSE will be
dispalyed in red on the LCD
screen. The unit will wait until
the next pulse is detected.
NO PULSE