GW Instek PPH-1503 - Manual (Page 32)

PPH-1503 User Manual
32
AverRead[1][2] Readback refresh rate. This will
display the average number count.
The settings for parameters[1][2] are
shared, the remaining parameters
[3][4] are set in their corresponding
menus.
[1] Power Supply functions
[2] DWM function.
[3] Pulse current measurement
[4] Long integration current
measurement
CurrRange The current range selection has
three settings: 5A, 5mA and Auto.
The 5mA range only accepts a
current setting 1A or less. If the
5mA range is selected and if the
current setting is greater than 1A,
the setting value is automatically
reduced to 1A.