GW Instek PPH-1503 - Manual (Page 100)

PPH-1503 User Manual
100
Example :SENSe:PCURrent:TIME:LOW?
Returns the integration time for low pulse
measurement.
Command
:SENSe[1]:PCURrent:TIME:AVERage
Function Sets the integration time for the average pulse
measurement.
Description NRf 33-833333, step resolution of 33.3
Example :SENSe:PCURrent:TIME:AVERage 0.000233
Sets the integration time for average pulse
measurement to 233 microseconds.
Command
:SENSe[1]:PCURrent:TIME:AVERage?
Function Returns the integration time for the average
measurement.
Example :SENSe:PCURrent:TIME:AVERage?
Returns the integration time for the average
measurement.
Command
:SENSe[1]:PCURrent:SYNChronize[:STATe]
Function Sets the triggering option for pulse current
measurement.
Description 0 /OFF: Digital trigger mode.
1/ON: Pulse level trigger mode.
Example :SENSe:PCURrent:SYNChronize ON
The trigger mode is set to the pulse level trigger.