GW Instek PPH-1503 - Manual (Page 68)

PPH-1503 User Manual
68
COM port
settings The following settings should be set to the
following:
 Baud rate: 115200 or less
 Parity: None
 Data bits: 8
 Stop bits: 1
 Data overflow control: None
Function Check Perform the following query:
*IDN?
The unit will return the manufacturer, model,
serial number and software version.
GW INSTEK, PPH-1503, SN: xxxxxxxx, Vx.xx
Disabling Remote
Control Mode
 Send a remote command to exit from
remote control mode from the PC or
long-press the unlock key on the front
panel to exit from the remote control
mode. The RMT icon in the status bar
will become grey when you exit from
remote control mode.
 The LOCK icon in the status bar will
also turn grey.
 Unplug the USB cable from the rear
panel.
RMT
LOCK
Note: USB devices are hot-plug devices. You can
directly remove the cable and exit.