GW Instek PPH-1503 - Manual (Page 59)

SAVE/RECALL
59
S
AVE/RECALL
Save Settings
Description Five groups of system settings are available.
Parameter data Listed below are the settings that are available for
each group (Rst is shown as an example).
Voltage: 00.500V CurrRange: 5A
Current: 2.0000A IntRate: 1.00PLC
OutputState: Off AverRead[1][2]: 1
DispType: Actual V and I O.V.P: Off
GPIBAddr: 16 LimMode: Limit
GPIBFormat: Exponential RelayControl: Zero
HighTime: 33us AverRead[3]: 1
LowTime: 33us TrigDelay: 0.10000
AverTime: 33us TrigLevel[3]: 0.000A
IntTime: 1.000s TrigEdge: Rising
Timeout: 16s TrigLevel[4]: 0.000A
Operation Press the Menu key to enter the main
menu interface.
Use the up and down arrow to select the
Save Setup option.
Press Enter to go to the Save Setup menu. 