GW Instek PPH-1503 - Manual (Page 36)

PPH-1503 User Manual
36
Press the left and right
arrow keys ( , ) to
fine tune the current
setting at the digit
level. The selected digit
will have a yellow dot
directly underneath.
Press the up and down
arrow keys (
, )
to adjust the selected
digit. Press the Current
key again to finish and
exit setting the current.

IntRate Use the arrow keys to select
IntRate
and press Enter. Input the
parameters and press Enter to save.
Range: 0.1 to 10.00
AverRead[1][2] Use the arrow keys to select
AverRead[1][2]
and press Enter. Input
the parameters and press Enter to
save.
Range: 1 to 10
CurrRange Use the arrow keys to select
CurrRange
and press Enter to go the
the CurrentRange menu. Input the
current range using the up and
down arrow keys. Press Enter to
save.