Remove test script – GW Instek PSW-Series User Manual User Manual

Page 94

PSW Series User Manual

Note

If the USB drive is not recognized, check to see
that the function settings for F-20 = 1 (page 106). If
not, reinsert the USB flash drive.

3. Configure T-03 (Test Export) to

0~10 (save memory slot)

T-03 range

1~10

4. The script will now be copied to the USB flash

drive.

Note

Error messages: If you try to export a test script
from an empty memory location “Err 003” will be
displayed on the display.

Remove Test Script

Overview

The Remove Test function will delete a test
script from the internal memory.

Steps

1. Select T-04 (Test Remove) and

choose which test script to remove
from the internal memory.

T-04 range

1~10

2. The test script will be removed from the

internal memory.