GW Instek PSW-Series User Manual - Manual (Page 114)

PSW Series User Manual
114
Setting Power On Configuration Settings
Background The Power On configuration settings can only
be changed during power up to prevent the
configuration settings being inadvertently
changed.
 Ensure the load is not connected.
 Ensure the power supply is off.
Steps 1. Hold the Function key whilst
turning the power on.
2. The display will show F-90 on the
top and the configuration setting
for F-90 on the bottom.
A
W
V
W
%W 100 80 60 40 20
ISR
C C
DLY
ALM
RMT
C V
VSR
Function OVP/OCP Set Output
PWR DSPL Lock/Local Test
PSW 30-36 360W
Voltage
Current
Multi-Range DC Power Supply
3. Rotate the Voltage knob to change
the F setting.
Voltage
Range F-90~ F-95
4. Use the Current knob to set the
parameter for the chosen F setting.
Current