GW Instek PSW-Series User Manual - Manual (Page 82)

PSW Series User Manual
82
OVP/OCP
 The master unit can shut down the slave
unit when OVP/OCP is tripped on the
master unit (if the slave connector is wired
for shut down on alarm).
 OVP and OCP level is determined by the
master OVP and OCP level. The OVP and
OCP level on the slave unit is ignored.
Remote monitoring
 Voltage monitoring (VMON) and current
monitoring (IMON) are only supported on
the master unit.
 The VMON voltage represents the total
voltage of the all the serialized units.
Remote Sense
 Please see the remote sense chapter for
details, page 68.
External Voltage and Resistance Control
 Voltage/Resistance controlled remote
control can only be used with the master
unit.
 The full scale voltage (in series) is equivalent
to the maximum external voltage or
resistance.
Slew Rate
 The actual slew rate is double that of the
setting slew rate. I.e., A slew rate setting of
60.00V/s is actually 120V/s when in series.
Internal Resistance
 The internal resistance is actually twice that
of the setting value.