GW Instek PSW-Series User Manual - Manual (Page 44)

PSW Series User Manual
44
Using the Output Terminal Cover PSW-30/80/160
Steps 1. Remove the screw holding the top cover to the
bottom cover.
2. Line-up the bottom cover with the notches in
the output terminals.
3. Place the top terminal cover over the bottom
cover.
Details 2
3
1
4. Use your thumb to slide the terminal covers
shut, as shown in the diagram below.
5. When the top and bottom covers are flush, re-
insert the screw that was removed in step 1.
4
5