GW Instek PSW-Series User Manual - Manual (Page 172)

PSW Series User Manual
172
PSW 1080W
PSW 30-108, PSW 80-40.5, PSW 160-21.6, PSW 250-13.5,
800-4.32
Model Unit
PSW
30-108 PSW
80-40.5 PSW
160-21.6 PSW
250-13.5 PSW
800-4.32
Rated Output Voltage V 30 80 160 250 800
Rated Output Current A 108 40.5 21.6 13.5 4.32
Rated Output Power W 1080 1080 1080 1080 1080
Power Ratio -- 3 3 3.2 3.125 3.2
Constant Voltage Mode
Line Regulation (*1)
mV 18 43 83 128 403
Load Regulation (*2) mV 20 45 85 130 405
Ripple and Noise (*3)
p-p (*4) mV 100 100 100 120 200
r.m.s (*5) mV 14 14 20 15 30
Temperature coefficient ppm
/ºC 100ppm/°C of rated output voltage, after a
30 minute warm-up.
Remote sense compensation
voltage (single wire)
V 0.6 0.6 0.6 1 1
Rise Time (*6)
Rated Load ms 50 50 100 100 150
No Load ms 50 50 100 100 150
Fall Time (*7)
Rated Load ms 50 50 100 150 300
No Load ms 500 500 1000 1200 2000
Transient response time (*8) ms 1 1 2 2 2
Constant Current Mode
Line regulation (*1)
mA 113 45.5 26.6 18.5 9.32
Load regulation (*9) mA 113 45.5 26.6 18.5 9.32
Ripple and noise
r.m.s (*5) mA 216 81 45 30 15
Temperature coefficient ppm
/ºC 200ppm/°C of rated output current, after a
30 minute warm-up.