GW Instek PSW-Series User Manual - Manual (Page 40)

PSW Series User Manual
40
Power Up
Steps 1. Type I or II: Connect the
power cord to the rear
panel socket.
Type III: Connect the
power cord to the
universal power input. Page 37
2. Press the POWER key. If used for the first time,
the default settings will appear on the display,
otherwise The PSW recovers the state right
before the power was last turned OFF.
For default configuration settings, see page 158.
V
A
CAUTION
The power supply takes around 8 seconds to fully
turn on and shutdown.
Do not turn the power on and off quickly. Please
wait for the display to fully turn off.