GW Instek PSW-Series User Manual - Manual (Page 75)

OPERATION
75
Bleeder Control
 The Master unit is used to control the
bleeder settings. The bleeder resistors in all
the slave units are always turned off when
in parallel mode.
Output Voltage/
Output Current
Model Single unit 2 units 3 units
PSW 30-36 30V 30V 30V
36A 72A 108A
PSW 80-13.5 80V 80V 80V
13.5A 27A 40.5A
PSW 160-7.2 160V 160V 160V
7.2A 14.4A 21.6A
PSW 250-4.5 250V 250V 250V
4.5A 9A 13.5A
PSW 800-1.44 800V 800V 800V
1.44A 2.88A 4.32A
PSW 30-72 30V 30V 30V
72A 144A 216A
PSW 80-27 80V 80V 80V
27A 54A 81A
PSW 160-14.4 160V 160V 160V
14.4A 28.8A 43.2A
PSW 250-9 250V 250V 250V
9A 18A 27A
PSW 800-2.88 800V 800V 800V
2.88A 5.76A 8.64A
PSW 30-108 30V 30V 30V
108A 216A 324A
PSW 80-40.5 80V 80V 80V
40.5A 81A 121.5A
PSW 160-21.6 160V 160V 160V
21.6A 43.2A 64.8A
PSW 250-13.5 250V 250V 250V
13.5A 27A 40.5A
PSW 800-4.32 800V 800V 800V
4.32A 8.64A 12.96A