GW Instek PSW-Series User Manual - Manual (Page 162)

PSW Series User Manual
162
PSW Specifications
The specifications apply when the PSW is powered on for at least
30 minutes.
PSW 360W
PSW 30-36, PSW 80-13.5, PSW 160-7.2, PSW 250-4.5,
800-1.44
Model Unit
PSW
30-36 PSW
80-13.5 PSW
160-7.2 PSW
250-4.5 PSW
800-1.44
Rated Output Voltage V 30 80 160 250 800
Rated Output Current A 36 13.5 7.2 4.5 1.44
Rated Output Power W 360 360 360 360 360
Power Ratio -- 3 3 3.2 3.125 3.2
Constant Voltage Mode
Line Regulation (*1)
mV 18 43 83 128 403
Load Regulation (*2) mV 20 45 85 130 405
Ripple and Noise (*3)
p-p (*4) mV 60 60 60 80 150
r.m.s (*5) mV 7 7 12 15 30
Temperature coefficient ppm
/ºC 100ppm/°C of rated output voltage, after a
30 minute warm-up.
Remote sense compensation
voltage (single wire)
V 0.6 0.6 0.6 1 1
Rise Time (*6)
Rated Load ms 50 50 100 100 150
No Load ms 50 50 100 100 150
Fall Time (*7)
Rated Load ms 50 50 100 150 300
No Load ms 500 500 1000 1200 2000
Transient response time (*8) ms 1 1 2 2 2
Constant Current Mode
Line regulation (*1)
mA 41 18.5 12.2 9.5 6.44
Load regulation (*9) mA 41 18.5 12.2 9.5 6.44