GW Instek PSW-Series User Manual - Manual (Page 58)

PSW Series User Manual
58
ALM
V
A
Before setting the OVP or OCP level:
 Ensure the load is not connected.
 Ensure the output is set to off.
Setting Ranges
PSW (360W) 30-36 80-13.5 160-7.2 250-4.5 800-1.44
OVP Range (V) 3-33 8-88 16-176 20-275 20-880
OCP Range (A) 3.6-39.6 1.35-14.85 0.72-7.92 0.45-4.95 0.144-1.584
PSW (720W) 30-72 80-27 160-14.4 250-9 800-2.88
OVP Range (V) 3-33 8-88 16-176 20-275 20-880
OCP Range (A) 5-79.2 2.7-29.7 1.44-15.84 0.9-9.9 0.288-3.168
PSW (1080W) 30-108 80-40.5 160-21.6 250-13.5 800-4.32
OVP Range (V) 3-33 8-88 16-176 20-275 20-880
OCP Range (A) 5-118.8 4.05-44.55 2.16-23.76 1.35-14.85 0.432-4.752
Steps 1. Press the OVP/OCP key. The
OVP/OCP key lights up.
OVP/OCP
2. The OVP setting will be displayed on the top
and the OCP setting (or OFF) will be displayed
on the bottom.
V
A
OVP Setting
OCP Setting