GW Instek PSW-Series User Manual - Manual (Page 88)

PSW Series User Manual
88
Test Script File Format
Background The test files are saved in *.tst file format.
Each file is saved as tXXX.tst, where XXX is the
save file number 001~010.
Test Script Settings
Test Run Runs the chosen test script from the internal
memory. A script must first be loaded into the
internal memory before it can be run. See the
test function Test Save, below.
The script will run as soon as the test function is
started.
T-01 1~10
Test Load Loads a test script from the USB drive to the
designated save slot in memory. A script must
first be loaded into internal memory before it
can be run.
T-02 1~10 (USBPSW)
Test Export Exports a script from the designated memory
save slot to the USB drive.
T-03 1~10 (PSWUSB)
Test Remove Deletes the chosen test file from the PSW
internal memory.
T-04 1~10
Test Memory Displays the amount of internal memory that is
available on the unit in kilobytes (1024 bytes).
T-05 Max: 1848 KB