Yokogawa GC1000 Mark II Process Gas Chromatograph - Manual (Page 28)

<2. LCD Emulator Window>
2-3
IM 11B03G03-03E
n Exiting
l Procedure
(1) Click on the [Exit] command in the [Connect] menu.
A dialog box pops up asking you to confirm the termination of the LCD emulator.
F0204.ai
(2) Click on the [Yes] button.
Communication with the analyzer is dropped and the LCD emulator terminates.
(3) Either run other software or terminate Windows™, and then turn off the power.
2.2 Basic Operations
The LCD Emulator window is exactly the same as the LCD panel both in appearance
and function. Buttons in the window can be operated by using the mouse, or by pressing
corresponding keys on the keyboard.
n Window Layout
The following figure shows the LCD Emulator window layout.
F0205.ai
Window switching keys
LED display area LCD display area
Setting keys
Function keys
n Window Operation
l Mouse Operation
Place the mouse cursor on the key to be operated and click the left mouse button. This allows the
same key operations as ones on the LCD panel.
l Keyboard Operation
Each window key corresponds to the keys on the keyboard, as shown in the following table.
Pressing these keys allows the same key operations as ones on the LCD panel.
4th Edition : Mar. 21, 2012-00