Yokogawa GC1000 Mark II Process Gas Chromatograph - Manual (Page 26)

<2. LCD Emulator Window>
2-1
IM 11B03G03-03E
2. LCD Emulator Window
The LCD emulator reproduces the LCD panel of the analyzer in the Windows™ operating
system. The screens and buttons on the LCD panel of the analyzer installed in the field
are drawn directly on a Windows™ display, and appear and function exactly the same way
as they do on the LCD panel. This chapter outlines the LCD Emulator window. For details,
see the GC1000 LCD Window Operation Manual, IM 11B03A03-05E.
l Prior to Operation
Before starting the emulator, always make sure that the:
• Maintenance Terminal is installed in your personal computer.
• analyzer and personal computer are linked through a communication line.
• analyzer is in the Remote mode.
2.1 Starting and Exiting the LCD Emulator
This section describes how to start and exit the LCD emulator.
n Starting
When the Maintenance Terminal is running, you cannot start the LCD emulator. Terminate the
Maintenance Terminal before you start the LCD emulator. You also cannot start the LCD emulator
unless the analyzer is in the Remote mode. Note that there is only one window from which the
LCD emulator can be started.
l Procedure
(1) Turn on the power to the personal computer, start up Windows™, and open the
Maintenance Terminal group window of Program Manager.
F0201.ai LCD emulator icon
4th Edition : Mar. 21, 2012-00