Introduction – Yokogawa GC1000 Mark II Process Gas Chromatograph User Manual
Page 2
i
IM 11B03G03-03E
Introduction
Thank you for purchasing the GCMT Gas Chromatograph Maintenance Terminal Software Pack-
age.
The GCMT Gas Chromatograph Maintenance Terminal Software Package (hereafter, it is abbre-
viated as Maintenance Terminal) is used to monitor and maintain the GC1000 Mark II analyzer on
a personal computer by linking the computer to the analyzer through a communication line.
This guide describes the basic procedures for operating the Maintenance Terminal.
l
Package Contents
Confirm that the purchased package contains the following:
• GCMT inatallation disks
• GCMT Gas Chromatograph Maintenance Terminal Software Package Operation Guide (IM
11B03G03-03E)
• “GCMT Capture It” software package manual (IM 11B3G1-02E)
l
How to User This Guide
This guide first describes how to install the Maintenance Terminal. Start at Chapter 1 after com-
pleting installation. The contents of each chapter are as follows:
• Chapter 1 .............an overview of the Maintenance Terminal and its basic operations
• Chapter 2 .............how to operate the LCD emulator
• Chapter 3 to 6 ......how to start the Maintenance Terminal and work with its respective panels
• Appendices ..........a functional ovweview of the Maintenance Terminal and list of its mes-
sages. Refer to the appendices for details on the menus and messages.
l
Intended Readers
The description on installation assumes that reders have a basic knowledge of both the hardware
and software required for installing the Maintenance Terminal. This is also true for Chapter 1 and
subsequent chapters, as well as for the Windows™ operating system.
However, the basic operations of Windows™ are specifically described in Chapter 1 so you can
work with it without prior knowledge. For the detailed operation of Windows, refer to the separate
appropriate manual.
l
Priority
Precautions in operating and handling the Maintenance Terminal are also found in the online help
window of the Maintenance Terminal and the README.TXT file that is registered during installa-
tion, inaddition to this guide. The order of precedence among these information sources is:
(1) README.TXT
(2) Help (online manual)
(3) Operation guide (this document)
4th Edition : Mar. 21, 2012-00
Media No. IM 11B03G03-03E
4th Edition : Mar. 2012 (YK)
All Rights Reserved Copyright © 2006, Yokogawa Electric Corporation