Teledyne LeCroy WaveExpert series Automation Manual - Manual (Page 95)

Chapter Three Control Reference
PODSCALIBRATIONWIZARD app.Acquisition.PodsCalibrationWizard
This control initiates calibration wizards.
Note: This controls is intended for On screen Wizard only. It involves operator's selections. Do not use
for fully Automated system.
PodsCalStartWizard Action
Description
This control starts Calibration of selected modules.
Note: This controls is intended for On screen Wizard only. It involves operator's selections. Do not use
for fully Automated system.
Calibrate Action
Description
This control cancels active calibration process.
Note: This controls is intended for On screen Wizard only. It involves operator's selections. Do not use
for fully Automated system.
CancelCalibration Action
Description
This control enables/disables calibration for channel 1 Module.
Note: This controls is intended for On screen Wizard only. It involves operator's selections. Do not use
for fully Automated system.
CalibratePod1 Bool
Description
Calibrate Action
CalibratePod1 Bool
CalibratePod2 Bool
CalibratePod3 Bool
CalibratePod4 Bool
CancelCalibration Action
PodsCalStartWizard Action
3-28 916435 RevA