Teledyne LeCroy WaveExpert series Automation Manual - Manual (Page 241)

Chapter Four Control Reference
PHASE
app.Measure.Px.Operator (ParamEngine = "Phase")
Sets/Queries the output type for Phase Px.
OutputType Enum
' Visual Basic Script
Set app = CreateObject("LeCroy.XStreamDSO")
' Set parameter P1 to phase difference.
app.Measure.P1.ParamEngine = "Phase"
' Set the output unit as radians.
app.Measure.P1.Operator.OutputType = "Radians"
Example
Description
Values
Degrees
DEGREES360
Percent
Radians
RADIANSTWOPI
OutputType Enum
RefFindLevel Action
RefHysteresis Double
RefLevelType Enum
RefPercentLevel Double
RefSlope Enum
SigFindLevel Action
SigHysteresis Double
SigLevelType Enum
SigPercentLevel Double
SigSlope Enum
4-37 916435 RevA