Teledyne LeCroy WaveExpert series Automation Manual - Manual (Page 251)

Chapter Four Control Reference
PercentLevel
From 0 to 100 step 1
Double
Range
Activate this control to find the vertical level for 50% for the waveform presented at the input to this
processor. (Only for LevelType = "Absolute"
FindLevel Action
' Visual Basic Script
Set app = CreateObject("LeCroy.XStreamDSO")
' Automatically find the level for 50% crossing as an absolute (vertical
units) value
app.Measure.P3.Operator.FindLevel
Example
Description
This setting establishes the zone around the level (or threshold for level crossings) which must be
traversed by the signal in order for the transition to be "qualified".
Hysteresis
From 0 to 10 step 0.1
Double
Range
Description
Slope Enum
Values
Both
Neg
Pos
4-47 916435 RevA