Teledyne LeCroy WaveExpert series Automation Manual - Manual (Page 220)

Chapter Four Control Reference
Trend mode, defines which parameter measurements are used to build the trend.
Mode Enum
Description
Values
All Trend all values
AllperTrace Trend an average of all values per acquisition
Average Trend all values per trace, clear before new acquisition.
PARAMDIFFERENCE
app.Measure.Px.Operator (ArithEngine = "ParamDifference")
PARAMINVERT
app.Measure.Px.Operator (ArithEngine = "ParamInvert")
PARAMPRODUCT
app.Measure.Px.Operator (ArithEngine = "ParamProduct")
PARAMRATIO
app.Measure.Px.Operator (ArithEngine = "ParamRatio")
PARAMRESCALE
app.Measure.Px.Operator (ArithEngine = "ParamRescale")
PARAMSUM
app.Measure.Px.Operator (ArithEngine = "ParamSum")
916435 RevA 4-16