Teledyne LeCroy WaveExpert series Automation Manual - Manual (Page 214)

Chapter Four Control Reference
Sets/Queries the additive A for the integral function Fx, where Fx = M . Input + A.
Adder
From -1e-009 to 1e-009 step 1e-012
Double
Range
Description
Sets/Queries the vertical scale for the integral function trace Fx.
VerScale
From 1e-012 to 1e+007 step 0.01, locked to 1 2 5, fine grain allowed=false, on=false
DoubleLockstep
Range
Description
Sets/Queries the vertical offset for the integral function trace Fx.
VerOffset
From -1e+006 to 1e+006 step 1e-015
Double
Range
Description
Initiates an action to find suitable vertical offset and scale for the integral function trace Fx.
FindScale Action
Description
Set/Query the state of the 'AutoFindScale' cvar, which enables the automatic scaling of the Integral
when the acquisition setup changes.
AutoFindScale Bool
Description
MATLABWAVEFORM
app.Math.Fx.OperatorYSetup (Operator = "MATLABWaveform")
Process a waveform using an external MATLAB application.
MATLABCode String
916435 RevA 4-10