Teledyne LeCroy WaveExpert series Automation Manual - Manual (Page 140)

Chapter Three Control Reference
Force all 'HelpMarkers' off.
(HelpMarkers are the on-trace annotation of measurement setup and results)
ClearAllHelpMarkers Action
Description
Sets/Queries the position of the left hand limit of the measure gate (n divisions).
Valid only when in either Std. Vertical or Std. Horizontal measurement modes. For MyMeasure see the
equivalent controls under Px.
StdGateStart
From 0 to 10 step 0.01
Double
Range
Description
Sets/Queries the position of the right hand limit of the measure gate (in divisions). Valid only when in
either Std. Vertical or Std. Horizontal measurement modes. For MyMeasure see the equivalent
controls under Px.
StdGateStop
From 0 to 10 step 0.01
Double
Range
Description
Clears the accumulated statistics for parametersP1 to P8 as well as the acumulated statistics for their
associated histicons.
ClearSweeps Action
Description
Resets all parameter setups, turning each of the parameters view to "off", the MeasurementType to
"measure"and the selected paramEngine to "Null".
ClearAll Action
Description
916435 RevA 3-73