Teledyne LeCroy WaveExpert series Automation Manual - Manual (Page 87)

Chapter Three Control Reference
This control is applicable in TDR operating mode only. It defines unit of TDR signal.
TDRMeasurementType Enum
Description
Values
Ohm
Percent
Reactance
Volt
Characteristic Impedance for TDR medium
TDRZ0
From 0 to 1000 step 0.1
Double
' Visual Basic Script
Set app = CreateObject("LeCroy.XStreamDSO")
' Set the characteristic impedance C1 to 50 ohms.
app.Acquisition.C1.TDRZ0 = "50"
Range
Example
Description
In Eye mode operation, this control turns on and off mask for given channel.
MaskOn Bool
Description
In Eye mode operation, this variable controls X-axis(horizontal) tolerance during Mask testing
XTolerance
From 0 to 100 step 1
Integer
Range
Description
In Eye mode operation, this variable controls Y-axis(vertical) tolerance during Mask testing
YTolerance
From 0 to 100 step 1
Integer
Range
Description
3-20 916435 RevA