Teledyne LeCroy WaveExpert series Automation Manual - Manual (Page 227)

Chapter Four Control Reference
High level in percent.
LowPct
From 10 to 40 step 1
Double
Range
Description
High level in percent.
HighPct
From 60 to 90 step 1
Double
Range
Description
For eye-diagram parameters which have an "aperture" setting, this defines the region over which the
eye digrams vertical information is analyzed.
It specifies the percentage of the central region of the eye (relative to 1 Unit Interval) which is used in
the analysis.
Aperture
From 0 to 100 step 0.1
Double
Range
Description
EYEHEIGHT
app.Measure.Px.Operator (ParamEngine = "EyeHeight")
For eye-diagram parameters which have an "aperture" setting, this defines the region over which the
eye digrams vertical information is analyzed.
It specifies the percentage of the central region of the eye (relative to 1 Unit Interval) which is used in
the analysis.
Aperture
From 0 to 100 step 0.1
Double
Range
Description
Aperture Double
CalcUnits Enum
CursorDisplay Enum
4-23 916435 RevA