Teledyne LeCroy WaveExpert series Automation Manual - Manual (Page 275)

A PPENDIX - A DCOM Setup
PC and Oscilloscope ARE on the Same NT Domain
• Select
Connect
, None, or Default on the Default Authentication Level field.
PC and Oscilloscope ARE NOT on the Same NT Domain
• Select
None
on the Default Authentication Level field.
6. Click the
Apply
button, and then close all dialogs.
7. Now, click
Start
Æ Run, enter dcomcnfg.exe and press Enter.
8. Select
LeCroyXStreamDSO
and click the Properties button.
9. On the
Properties
dialog, click the Identity tab, and select The interactive user radio button.
A-
916435 RevA
18