Teledyne LeCroy WaveExpert series Automation Manual - Manual (Page 229)

Chapter Four Control Reference
For eye-diagram parameters which have an "aperture" setting, this defines the region over which the
eye digrams vertical information is analyzed.
It specifies the percentage of the central region of the eye (relative to 1 Unit Interval) which is used in
the analysis.
Description
EYEOPENINGFACTOR
app.Measure.Px.Operator (ParamEngine = "EyeOpeningFactor")
For eye-diagram parameters which have an "aperture" setting, this defines the region over which the
eye digrams vertical information is analyzed.
It specifies the percentage of the central region of the eye (relative to 1 Unit Interval) which is used in
the analysis.
Aperture
From 0 to 100 step 0.1
Double
Range
Description
Set/Query the CursorDisplay cvar. This defines whether the source trace is annotated with 'Help
Markers' generated by the measurement.
CursorDisplay Enum
Description
Values
Detailed
Off
Simple
Aperture Double
CursorDisplay Enum
EYEOVERSHOOTNEGATIVE
app.Measure.Px.Operator (ParamEngine = "EyeOvershootNegative")
Aperture
From 0 to 100 step 0.1
Double
Range
Aperture Double
4-25 916435 RevA