Teledyne LeCroy WaveExpert series Automation Manual - Manual (Page 195)

Chapter Three Control Reference
Vertical Position of the trace, normalized to a value between -1.5 and 1.5. A value of zero is the
default, and indicates no position change relative to the source trace.
VerPos
From -1.5 to 1.5 step (8 digits)
Double
Range
Description
Horizontal Zoom setting. Locked to a 1, 2, 5 sequence unless VariableHorZoom is set to True .
HorZoom
From 0.1 to 1e+006 step (8 digits)
Double
Range
Description
Horizontal Position of the trace, normalized to a value between -0.5 and 0.5. A value of zero is the
default, and indicates no position change relative to the source trace.
HorPos
From -0.5 to 0.5 step (8 digits)
Double
Range
Description
SCANOVERLAY app.WaveScan.ScanOverlay
Sets/Queries the trace's 'Viewed' state. When true, the trace is displayed on one of the display
graticules. Note that even when a trace is not visible, it may be used as a source for Math, Measure,
etc.
View Bool
Description
ClearSweeps Action
EnablePersistence Bool
Persisted Bool
PersistenceSaturation Integer
PersistenceTime Enum
ShowLastTrace Bool
View Bool
3-128 916435 RevA