Teledyne LeCroy WaveExpert series Automation Manual - Manual (Page 250)

Chapter Four Control Reference
This (one of two) time positions, delimits the range of the feature in the TDR signal to be analyzed for
the purpose of estimatingof capacitance and inductance.
CursorTimePos2
From -1.79769e+308 to 1.79769e+308 step 0
Double
Range
Description
TIE
app.Measure.Px.Operator (ParamEngine = "TIE")
TIE is "Time Interval Error", or the error in expected arrival time of trnasotions in either a data stream or a clock signal.
It is the heart of most jitter measurments (where only one signal is under analysis). The Skew processor is closely
related to this function in cases where measurements are using a separate reference clock.
WARNING: The TIE processor is appropriate for analysis of "real-time" acquired waveforms for jitter and timing
variations. It will give incorrect results for equivalent-time type waveforms.
LevelType Enum
Values
Absolute
Percent
BaseFrequency Double
DataIsNRZ Bool
FindBaseFrequency Action
FindLevel Action
FrequencyMultiplier Double
Hysteresis Double
IncludeVirtualEdges Bool
IntervalsEdgeEdge Integer
IntervalType Enum
LevelType Enum
MaxComboIntervals Integer
PercentLevel Double
SignalType Enum
Slope Enum
Summary String
UseAllEdges Bool
UseBaseFrequency Enum
UseMultiEdgeCombos Bool
UsePLL Bool
916435 RevA 4-46