Teledyne LeCroy WaveExpert series Automation Manual - Manual (Page 194)

Chapter Three Control Reference
ZOOM app.WaveScan.ScanHisto.Zoom
Resets the zoom settings to their default values.
ResetZoom Action
Description
Enable/Disable the variable Vertical Zoom control. If enabled, the VerZoom control may be set to a
value other than the standard 1, 2, 5 sequence.
VariableVerZoom Bool
Description
Enable/Disable the variable Horizontal Zoom control. If enabled, the HorZoom control may be set to a
value other than the standard 1, 2, 5 sequence.
VariableHorZoom Bool
Description
Vertical Zoom setting. Locked to a 1, 2, 5 sequence unless VariableVerZoom is set to True .
VerZoom
From 0.1 to 100 step (8 digits)
Double
Range
Description
HorPos Double
HorZoom Double
ResetZoom Action
VariableHorZoom Bool
VariableVerZoom Bool
VerPos Double
VerZoom Double
916435 RevA 3-127