Teledyne LeCroy WaveExpert series Automation Manual - Manual (Page 265)

A PPENDIX - A DCOM Setup
3. On the Add a Port pop-up, provide port Name (DCOM), Number (135), select the TCP radio button, and click
OK
.
4. Now, if the PC and Oscilloscope are on the same NT domain, turn off simple file sharing by going to Start Æ
Settings
Æ Control Panel. Double-click on Folder Options. Click the View tab on the Folder Options
window, scroll to the bottom, uncheck the Use simple file sharing (Recommended), and click OK.
916435 RevA
A-8