Teledyne LeCroy WaveExpert series Automation Manual - Manual (Page 186)

Chapter Three Control Reference
Sets/Queries the currently selected type of currently selected remote control interface.
Interface Enum
Description
Values
Off
TCPIP
Sets/Queries the setting of the remote assistant.
Assistant Enum
Description
Values
EO Log errors only
FD Log all remote commands/queries
OFF Turn the assistant off
Sets/Queries whether remote control is restricted to certain hosts, where the host name is defined
either by IP address, or dns name.
RestrictControl Enum
Description
Values
No
Yes
Enable the resetting of the remote assistant to 'Errors Only' mode when the instrument is reset. Also
ensure s that the remote assistant log is cleared upon startup.
This control is set by default to lower the risk that the remote assistant will be set to 'Full Dialog' mode
and be forgotten, causing a decrease in remote control performance.
SetToErrorsOnlyAndClearAtStartup Bool
Description
Interface Enum
RestrictControl Enum
SetToErrorsOnlyAndClearAtStartup Bool
WAVESCAN app.WaveScan
This is the root of the WaveScan automation hierarchy.
916435 RevA 3-119