Teledyne LeCroy WaveExpert series Automation Manual - Manual (Page 282)

A PPENDIX - A DCOM Setup
13. On the resulting dialog, click the Add button.
• If the PC and Oscilloscope ARE in the same NT domain, this is a User Level configuration. Provide the
exact same user account (username and password) created on the PC (covered previously in this
manual). Click OK.
• If the PC and Oscilloscope ARE NOT in the same NT domain, this is a Share Level configuration.
Provide the exact same user account (username and password) created on the PC (covered previously
in this manual). However, the username must be preceded by the NT domain name and a backslash \.
Example
: LECROY\John.Smith.
14. Repeat this process (Steps 6-13) for the Launch Permissions (on the Properties dialog). When finished, be
sure to click Apply and OK on all dialogs and close the Component Services window.
15. Now, click Start Æ Shut Down, select Restart and click OK to reboot the oscilloscope.
16. When the instrument has rebooted, test the connection from the PC using the following topic (Testing the
DCOM Connection from the PC).
A-25
916435 RevA