Teledyne LeCroy WaveExpert series Automation Manual - Manual (Page 248)

Chapter Four Control Reference
High level in percent.
LowPct
From 5 to 90 step 1
Double
Range
Description
High level in percent.
HighPct
From 10 to 95 step 1
Double
Range
Description
Set the levels to 10% and 90% of full amplitude.
SetLevel1090 Action
Description
Set the levels to 20% and 80% of full amplitude.
SetLevel2080 Action
Description
ROOTMEANSQUARE
app.Measure.Px.Operator (ParamEngine = "RootMeanSquare")
If true, the calculation is limited to a whole number of cycles detected in the input.
Cyclic Bool
Description
Cyclic Bool
STANDARDDEVIATION
app.Measure.Px.Operator (ParamEngine = "StandardDeviation")
916435 RevA 4-44