Teledyne LeCroy WaveExpert series Automation Manual - Manual (Page 198)

Chapter Three Control Reference
Reset all Zx to their default settings.
Zoom all Cx that are on at an horizontal factor of 10.
QuickZoom Action
Description
Turn MultiZoom On and includes all the Zx automatically if any viewed.
MultiZoomOn Bool
Description
Resets the zoom settings to their default values.
ResetZoom Action
Description
Enable/Disable the variable Horizontal Zoom control. If enabled, the HorZoom control may be set to a
value other than the standard 1, 2, 5 sequence.
VariableHorZoom Bool
Description
When in multi-zoom mode, scroll to the start of the source waveform, who's first point will be centered
on the graticule.
GoToStart Action
Description
916435 RevA 3-131