Teledyne LeCroy WaveExpert series Automation Manual - Manual (Page 260)

A PPENDIX - A DCOM Setup
Prepare the PC – Case 1: Windows XP or Vista
Note:
For PCs running Windows 2000, refer to Prepare the PC – Case 2: Windows 2000 SP4 topic found later in this manual.
1. Install
XStreamBrowserInstall
version 1.0.4 or higher
2. Execute
dcomcnfg.exe:
• Click
Start
Æ Run, enter dcomcnfg.exe and click OK.
• If Run is not in your start menu, open a command prompt console and run dcomcnfg.exe.
3. Expand
Component Services
by clicking the + plus sign or triangle symbol (this may take a few minutes).
4. If a Windows Security Alert pop-up is shown, click the Unblock button.
5. Expand
Computers
, right-click My Computer, and select Properties.
A-3
916435 RevA