Teledyne LeCroy WaveExpert series Automation Manual - Manual (Page 272)

A PPENDIX - A DCOM Setup
15. In the Launch Permissions dialogue, verify that for all permissions the Allow checkbox is checked.
16. Now, repeat the process while editing the Access Permission settings from the LeCroyXStreamDSO
Properties dialog.
17. Now, click Start Æ Shut Down, select Restart and click OK to reboot the oscilloscope.
18. When the instrument has rebooted, we can now test the connection by proceeding to the Testing the DCOM
Connection from the PC
topic at the end of this manual.
A-15
916435 RevA