Teledyne LeCroy WaveExpert series Automation Manual - Manual (Page 245)

Chapter Four Control Reference
CursorShape Enum
Values
Absolute
Difference
Reference
RANGE
app.Measure.Px.Operator (ParamEngine = "Range")
Leftmost percentile setting (default 0.0), and always 0.0 is "UsePercentiles" is false. Otherwise you
can use this control directly or indirectly to set the leftmost percentile (confidence level expressed as a
percent), or this can be set automatically from BER and ErrorBias.
Percent1
From 0 to 100 step 0.001
Double
Range
Description
Rightmost percentile setting (default 0.0), and always 0.0 is "UsePercentiles" is false. Otherwise you
can use this control directly or indirectly to set the rightmost percentile (confidence level expressed as
a percent), or this can be set automatically from BER and ErrorBias.
Percent2
From 0 to 100 step 0.001
Double
Range
Description
BER DoubleLockstep
ErrorBias Enum
PctRes DoubleLockstep
Percent1 Double
Percent2 Double
SetPctFromBER Bool
TxDensity Double
UsePercentiles Bool
VarBER Bool
4-41 916435 RevA