Luminex 100 IS Version 2.2 - Manual (Page 70)

Luminex 100 IS Developer Guide to x MAP Technology Version 2.2 x MAP Technology
64 PN 89-00002-00-032 Rev. A
3. Click Cancel to close the dialog box.
Delete a Used Template
(with Associated Batches)
‹ To delete templates that do have batches associated with them:
If the template has batches associated the template ID cell is blue
and the Delete button for that entry is grayed out. In this case,
use the Delete Batch button on the left side of the screen. You
must delete associated batches, then you can delete the template.
Note: Any batch results associated to this template are deleted
from the Luminex 100 IS system. If you delete a batch, you can
no longer retrieve the data in the current database.
1. Using the Luminex 100 IS software perform a database backup.
Then return to Developer WorkBench.
2. Click Edit Template. An Open Template dialog box appears.
See Figure 51.
Figure 51. Open Template Dialog Box—Select Used
Template to Delete
3. Select the template you want to delete (the template ID cell is
blue) and click Delete Batch.
4. At the Warning prompt, click Yes.
5. Each batch displays a warning prompt, click Yes.
Note: Batches are permanently removed and can not be
recovered if they were not backed up.
6. The template ID turns white since it has no batches associated
with it. Highlight the template and click Delete.
7. Click Cancel to close the dialog box.